The ginkgo nut hulling machine is the main equipment used to process Ginkgo Biloba. Ginkgo sheller is divided into two systems: shelling and waste shells removal system. Under the right cone is the shelling system, and the left is the waste shell removing system. The gingko sheller machine has the advantages of high shelling rate, easy operation and long service life.
Working Principle of Ginkgo Nut Shelling Machine:
It’s used for shelling ginkgo nut. This machine is composed with two systems: shelling and wast discharging. Ginkgo or other appropriate beans through a funnel into the shelling system, shell and seeds separate by friction.
Then powerful suction from wast discharing system absorb shell whiix is light separate from the seeds, finally, you could get shelling ginkgo seeds. The machine is a good choice for ginkgo processing plant.
Matters Need Attention:
1. During the operation of the current and the motor, we must check if the bolts are loose and beating, whether the auxiliary junction boxes and fan covers are loose and so on.
2. Also regularly check the replacement of lubricating oil (grease, mechanical oil) Check the bearing clearance is generally controlled within 100mm is 0.02-0.08mm, more than 100 is generally 0.06 --- 0.20mm, in actual use, the large diameter to About 0.17 will be replaced. Mainly depends on the size of the motor's breath, small motors generally a few millimeters, large-capacity motors are generally about a millimeter.
3. If you want to overhaul, you must move the key switch to the inspection position to prevent accidents.
The ginkgo nut shelling machine is the main equipment used to process Ginkgo Biloba. Ginkgo sheller is divided into two systems: shelling and waste shells removal system. Under the right cone is the shelling system, and the left is the waste shell removing system. The gingko sheller machine has the advantages of high shelling rate, easy operation and long service life.