Colloid Mill Ghee Butter Making Machine Structure:

Colloid mill from the grinding parts, base drive components, the motor consists of three parts. Parts of the machine contact materials are made of high quality stainless steel, static and dynamic grinding is a key component of the machine, according to the nature of the material being processed, grinding tooth profile are different, but the material is made of stainless steel. The motors are specially designed according to the needs of the colloid mill, and the baffle plate is installed on the edge of the motor to prevent leakage.

The use of Colloid Mill is very extensive, ghee butter grinder can be used to grind dairy products, chocolate, bean paste, jam, peanut butter, butter drinks and so on. can also be used in the chemical industry: pigments, lubricants, spices, dyes, emulsified asphalt, emulsion rubber, catalysts, paint paint and so on.

Installation Precautions about Ghee Butter Grinder:

1, The equipment level is installed on the flat concrete foundation, and uses the anchor screw to fix.

2, Check each fastening screws are tightened.

3, Before use, with special wrench rotating rotor, check with the stator is contact, there is no card machine phenomenon, if the above situation does not allow boot.

4, Check and connect the power cord (three-phase alternating current, voltage of 380 volts, body protection grounding) and note that the rotor rotation direction should be aligned with the arrow on the base (clockwise rotation).

5, Connected to the cooling water, and pay attention to the signs.

6, Start the motor, first switch, check whether there is noise, vibration. If the situation is not normal should be immediately shut down, troubleshooting after the commissioning.

7, After the work of cleaning the stator, the residual material in the rotor should be carried out under the operating state, the first KCAL will be rotated counterclockwise direction of not less than 90 ° after cleaning.

8, The fixed, the rotor clearance adjustment method (adjustment should be carried out in the operating state).